The diaphragm valve replaces the spool assembly with a corrosion-resistant lined body and a corrosion-resistant diaphragm, which uses the movement of the diaphragm to regulate. Diaphragm valve body material made of cast iron, cast steel, or cast stainless steel, and lined with a variety of corrosion resistant or wear-resistant materials, diaphragm material rubber and PTFE. The diaphragm of the lining has strong corrosion resistance, which is suitable for the regulation of strong corrosive media such as strong acid and alkali.
Diaphragm valve has simple structure, small fluid resistance, flow capacity is larger than other types of valves with the same specifications; No leakage, can be used for the adjustment of high viscosity and suspended particles medium. The diaphragm isolates the medium from the stem upper chamber, so there is no packing medium will not leak. However, due to the limitations of diaphragm and lining materials, pressure resistance and temperature resistance is poor, generally only suitable for 1.6MPa nominal pressure and 150℃ below.
The flow characteristic of diaphragm valve is close to the fast opening characteristic, which is approximately linear before 60% stroke, and the flow rate is little changed after 60%. Pneumatic diaphragm valves can also be equipped with feedback signals, limiter and positioner devices, in order to meet the needs of automatic control, program control or flow regulation. Pneumatic diaphragm valve feedback signal using contactless sensing technology. The product uses film propulsion cylinder, instead of piston cylinder, to eliminate the piston ring is easy to damage, resulting in leakage and can not push the valve opening and closing disadvantages. When the air source failure, still can operate the hand wheel to open and close the valve. The diaphragm valve replaces the spool assembly with a corrosion-resistant lined body and a corrosion-resistant diaphragm, which uses the movement of the diaphragm to regulate. Diaphragm valve body material made of cast iron, cast steel, or cast stainless steel, and lined with a variety of corrosion resistant or wear-resistant materials, diaphragm material rubber and PTFE. The diaphragm of the lining has strong corrosion resistance, which is suitable for the regulation of strong corrosive media such as strong acid and alkali.
Diaphragm valve has simple structure, small fluid resistance, flow capacity is larger than other types of valves with the same specifications; No leakage, can be used for the adjustment of high viscosity and suspended particles medium. The diaphragm isolates the medium from the stem upper chamber, so there is no packing medium will not leak. However, due to the limitations of diaphragm and lining materials, pressure resistance and temperature resistance is poor, generally only suitable for 1.6MPa nominal pressure and 150℃ below.
The flow characteristic of diaphragm valve is close to the fast opening characteristic, which is approximately linear before 60% stroke, and the flow rate is little changed after 60%. Pneumatic diaphragm valves can also be equipped with feedback signals, limiter and positioner devices, in order to meet the needs of automatic control, program control or flow regulation. Pneumatic diaphragm valve feedback signal using contactless sensing technology. The product uses film propulsion cylinder, instead of piston cylinder, to eliminate the piston ring is easy to damage, resulting in leakage and can not push the valve opening and closing disadvantages. When the air source failure, still can operate the hand wheel to open and close the valve.
Post time: Apr-26-2023
